I am posting the new version of Lackey now. This is not an official release. I completely redid the networking, among other things, and I'm not completely sure that everything is working. Since this is not a full official release, there are a few extra things you should know...
If you aren't slightly adventurous, you might want to ignore this. You need to take a few more (albeit simple) steps to get things working.
I am just releasing the application, not the whole Lackey folder. All you need to do is unzip this version and put it into an existing Lackey folder. Note that you need not delete your old Lackey exe.
The old Lackey and old Lackey Server will continue to work exactly as it did before.
When using the new Lackey, you will need to connect to the Lackey server directly. In the server panel, you will need to enter in the IP 66.65.20.193 and use port 25712. Note that the new Lackey uses a new default port of 25712 for the server to connect to. You don't need to change any of your firewall settings because of this though.
The old Lackey and the new Lackey are completely incompatible. But if you see someone on the server, you can be assured that they are using the new Lackey. But if you try to direct connect to someone's game without using the server, if they aren't using the new Lackey, it won't work.
If you are hosting a game without using the server as a proxy server (which you should try to do), you need to open both TCP and UDP ports. The old Lackey requires you to just open the TCP port.
Although I have tested things and things appear to be working, stuff might not work. That's the whole point. Please report bugs in this thread.
One of the new things is accounts and account registration that I am testing. As such, I am issuing all testers temporary accounts. You do NOT need to make an account, but doing so allows you to save your name so no one else can use it. If you want a temporary account, email trevor@lackeyccg.com with "Lackey Account Request" as the email title. Email me your account name, email address, and a temporary password that you want. These accounts are temporary and they will get wiped when I make the new Lackey version the official version.
I will try to keep the server up all the time. If things are majorly screwed up, I will post in this thread about it and the new server may be down in that case.
There are several new features which I will list later, but right now I am mostly concerned with making sure the previous functionality is restored.
I am particularly interested in hearing if the new version simply does not launch, or if it crashes, or things of that nature. If you experience a bug, please let me know as much specific information as possible so that I can fix it.
The links for the windows and mac version applications are:
http://lackeyccg.com/LackeyCCGWin.zip
http://lackeyccg.com/LackeyCCGMac.zip
I tested some stuff with Alash. There are a few minor bugs. "Add X" counters to a card is buggy, but incrementing counters with the + button works fine. And Reveal X cards functionality has a few bugs. I'll fix those bugs as well as any other bugs I get a report on and post a new version tomorrow.
Don't forget to fix the bug where putting card(s) on top or bottom does the opposite thing.
Also I'm not sure having you manually create accounts is the ideal solution to the issue of unique IDs. Wouldn't it be easier for both parts if the box where you fill in your name checked the server if that name is already taken?
Other than that I'm already liking the new patch.
Quote from: Alash on October 11, 2010, 08:01:37 AM
Don't forget to fix the bug where putting card(s) on top or bottom does the opposite thing.
Also I'm not sure having you manually create accounts is the ideal solution to the issue of unique IDs. Wouldn't it be easier for both parts if the box where you fill in your name checked the server if that name is already taken?
Other than that I'm already liking the new patch.
The top/bottom issue is part of the Reveal X bug I mentioned. I am still figuring out how I will handle account creation automation.
The new Lackey does not work under Linux with wine anymore.
It crashes with this message:
Runtime Error!
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's supprt team for more information.
Quote from: countcb on October 11, 2010, 08:07:26 PM
The new Lackey does not work under Linux with wine anymore.
It crashes with this message:
Runtime Error!
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's supprt team for more information.
That's not good news. I'm not testing linux at the moment. At present, linux isn't officially supported. I'll try to make sure at least WINE works.
I just posted a new version. The build date should say 10-12-10. I believe I've fixed all the bugs people reported. Let me know if you find any bugs.
So this is the full new ver and not just an update?
Hey, can't use the Yu-Gi-Oh! Plugin at all. Lackey crashes every time.
Quote from: Adalam on October 11, 2010, 10:09:10 PM
Hey, can't use the Yu-Gi-Oh! Plugin at all. Lackey crashes every time.
Any other plugin give you issues, or just that one? Try deleting your prefs.txt file.
Just Yu-Gi-Oh! My homemade plugin works great.
The new PM works like so. There are 2 ways you can private message someone. Either select their name in the player list and hit the Send whisper button, or do a command like "/t Trevor" to start whispering to trevor. /w also works. You don't need to type in their entire name.
Cool. Anyway, still having trouble with Yu-Gi-Oh!, maybe it needs to be updated or something, I dunno.
Quote from: Adalam on October 11, 2010, 10:15:29 PM
Cool. Anyway, still having trouble with Yu-Gi-Oh!, maybe it needs to be updated or something, I dunno.
Should work now.
Quote from: Trevor on October 11, 2010, 10:39:36 PM
Quote from: Adalam on October 11, 2010, 10:15:29 PM
Cool. Anyway, still having trouble with Yu-Gi-Oh!, maybe it needs to be updated or something, I dunno.
Should work now.
OK...
now it should work.
Quote from: DemonicSei on October 12, 2010, 07:32:30 AM
Trevor, any news on the official release date (so that everyone stop using the old version)?
As soon as I'm sure there are no crippling bugs. I'm not aware of any in the current posted build. Take a look. Play some games and see if you notice anything. The server has been stable, but I am wondering if its just because it hasn't had enough activity.
Yugioh works now.
can i do this thru auto updater or do i need to do a whole new dl>>??
What do you mean drag into my folder. if this is a new dl, wont it force me to redo all my plugins
When you connect to server with IP and you change what is written in "server IP" , it still uses what is written in "recent server IP" when you try to connect.
Trevor is there a change log so I know what is new with this version.
Just downloaded.
One bug I have noticed, that is game specific, so it may be the plug-in.
I load the game and go into the Deck editor, If i don't have the cards downloaded in some cases it will crash when I go to look at the cards. Magic and Doomtown work fine downloading images, but L5R and Magi-Nation both have crashed several times. Yu-Gi-Oh crashes in Deck Editor but will download using download missing images.
This may be just me, so someone may want to try to duplicate.
Would also help to know if you were using the windows or mac client.
Quote from: Jigz on October 12, 2010, 06:33:06 PM
Just downloaded.
One bug I have noticed, that is game specific, so it may be the plug-in.
I load the game and go into the Deck editor, If i don't have the cards downloaded in some cases it will crash when I go to look at the cards. Magic and Doomtown work fine downloading images, but L5R and Magi-Nation both have crashed several times. Yu-Gi-Oh crashes in Deck Editor but will download using download missing images.
This may be just me, so someone may want to try to duplicate.
Someone reported a very similar issue with yugioh and I fixed it. Try downloading the version online now and let me know if it persists.
yeah they are working now.
It was on Windows.
Rage works fine.
B5... times out. There's a slight typo in the plugininfo list (B5 needs to be capitilised in the URL) but even connecting to the right one leads to failure - it times out. Since I can access the updatelist.txt fine through a browser I have to assume there's a bug somewhere. (It WAS working last time I tried so I don't think it's me... but I leave that option open!)
http://www.werepenguin.com/B5/lackey/low/updatelist.txt
Quote from: Picks-at-Flies on October 13, 2010, 06:37:36 PM
Rage works fine.
B5... times out. There's a slight typo in the plugininfo list (B5 needs to be capitilised in the URL) but even connecting to the right one leads to failure - it times out. Since I can access the updatelist.txt fine through a browser I have to assume there's a bug somewhere. (It WAS working last time I tried so I don't think it's me... but I leave that option open!)
http://www.werepenguin.com/B5/lackey/low/updatelist.txt
Maybe the server was down. That URL works for me.
Curiously it worked for me too, so clearly a temporary aberration. Thanks for checking anyway.
I just posted a new version as of 10/15. Let me know if you find any bugs.
I just posted a new version as of 10/16/10.
Let me know if you find any bugs.
Good news bad news. Good news a few days ago I could log on for the first time in almost a full year, bad news I can no longer log on.
I got the same as Buck Trev. When you had the most recent out I went fine. Now, I cant connect to the server. My settings are correct with the port number and such, double checked with the thread and everything, but now can't get on with most recent version.
This server does seem to be down. We will have to wait for Trevor to wake up and restart it. He probably likes to sleep in on Saturdays. I know I do.
Quote from: mathman1550 on October 16, 2010, 09:26:50 AM
This server does seem to be down. We will have to wait for Trevor to wake up and restart it. He probably likes to sleep in on Saturdays. I know I do.
I deliberately took the server down. It was not a crash. The server has not crashed yet. I will put it back up after I fix something.
Well then I will give it a try when it is back up and hope for the best.
Test server is back up and will remain so.
Sweet I can still log on. Now I just need more people on so I can play something :)
I keep getting D/Ced
I see a msg in the log that reads "Client starving for pulse" that becuase I was idle for to long? It was less than 2mins.
Quote from: TheBuck on October 16, 2010, 12:28:50 PM
Sweet I can still log on. Now I just need more people on so I can play something :)
I keep getting D/Ced
I see a msg in the log that reads "Client starving for pulse" that becuase I was idle for to long? It was less than 2mins.
If you can, IM me on AIM at Lykos4 to test that.
I've been able to replicate it. I'm fixing it.
And...
Fixed.
That should never happen again. If it does, let me know. The only time you should see the starving for a pulse message is if you pull out your internet cord or something like that where you lose your internet connection in an unusual way.
New issue.
Everytime I try and get a plugin and I only tried 3 (mtg,shadowfist and star trek) I keep getting the error: Timed out while updating plugin.
The Shadowfist one works fine for me. Might be a dns issue or router between you and the plugin host Buck.
Issue has been fixed. Looks like I will be playing some games in the next few days if people are around! Thanks for the info.
Yay! You can Rage again!
Quote from: Picks-at-Flies on October 17, 2010, 09:04:30 AM
Yay! You can Rage again!
I'm going to need to learn how to play it all over again :(
When trying out my Smash Cards plugin, I saw the bot picture did not change to the one that my plugin uses. I also tried the Pokemon plugin (Which also has its own custom bot picture), and the bot picture stayed the same again.
Btw this is on Windows version.
Quote from: Shadowmaster on October 17, 2010, 11:57:51 AM
When trying out my Smash Cards plugin, I saw the bot picture did not change to the one that my plugin uses. I also tried the Pokemon plugin (Which also has its own custom bot picture), and the bot picture stayed the same again.
Btw this is on Windows version.
Fixed.
Whenever I drag the new lackeyccg.exe over to my lackey folder, it asks to replace the original. I say yes to all, then try to run lackey and get "The application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem."
Ideas?
That's a known issue. Trevor has been working on it the last couple of nights.
Quote from: Schwooby on October 17, 2010, 03:30:07 PM
Whenever I drag the new lackeyccg.exe over to my lackey folder, it asks to replace the original. I say yes to all, then try to run lackey and get "The application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem."
Ideas?
Try this .exe, Schwooby.
http://www.lackeyccg.com/LackeyCCGshouldwork.zip
Let me know if that runs for you.
Same error :(
Are there any steps that I'm missing?
I use the name ElijahWilkes on Lackey. Anyways, I got it working now but me and someone else found a bug. Dunno if it's just us or what but for some reason we're seeing different cards than our opponents are. We're using the Magic plugin and for example, I played Quest for the Holy Relic and they saw Acidic Slime. And they played Graypelt Refuge and I saw Quest for the Goblin Lord. Any ideas?
Quote from: TiamatRuler on October 17, 2010, 09:09:37 PM
I use the name ElijahWilkes on Lackey. Anyways, I got it working now but me and someone else found a bug. Dunno if it's just us or what but for some reason we're seeing different cards than our opponents are. We're using the Magic plugin and for example, I played Quest for the Holy Relic and they saw Acidic Slime. And they played Graypelt Refuge and I saw Quest for the Goblin Lord. Any ideas?
How exactly did you "get it working"?
That "bug" where you see different cards is because you are not using the same version of the plugin. In other words, one of you has more cards than the other. Run autoupdate and relaunch and you should both see the same number of cards in the deck editor. I will make lackey give a clear warning about players not having the same version of the plugin. On the plus side, if you have a particular printing of a card in your deck, your opponent will see exactly the version of the card you chose rather than merely a card that shares the same name.
I'm sorry, I worded that wrong. I didn't mean that I got it working, I just meant that it was working now thanks to you sending me the other link. Anyways...I know my plugin is completely updated because I have all the way up to the most recent set. And they said that they had just reupdated the plugin to make sure. Also, it wasn't that they had the same name, it was completely different cards, dunno if that makes a difference.
Quote from: TiamatRuler on October 17, 2010, 10:15:43 PM
I'm sorry, I worded that wrong. I didn't mean that I got it working, I just meant that it was working now thanks to you sending me the other link. Anyways...I know my plugin is completely updated because I have all the way up to the most recent set. And they said that they had just reupdated the plugin to make sure. Also, it wasn't that they had the same name, it was completely different cards, dunno if that makes a difference.
Cards are now assigned card ids, internally. Your lackey will tell their lackey that you have a card # 315. As long as you both have the same version of the plugin, your card 315 is the same as theirs. Please look in your deck editors and tell me how many total cards each of you have listed there. If they are the same, and you see mismatch names, there is a bug. If there is a different count, the person with the lower number needs to update.
I'm still fixing some things. Soon.
Quote from: DemonicSei on October 17, 2010, 11:55:52 PM
Quote from: Trevor on October 17, 2010, 11:35:04 PM
I'm still fixing some things. Soon.
Define "soon". ;)
Some people have reported not even being able to launch Lackey. I am not going to release the new lackey as the official version with a major problem like that. I think it will be fixed in a day or 2.
There's been additional bugs that prevent the game from even launching in some situations. Trevor is I believe, working to resolve that before declaring an "official" release of the new version and doing away with the old.
Try installing this:
http://www.microsoft.com/downloads/en/details.aspx?familyid=200b2fd9-ae1a-4a14-984d-389c36f85647&displaylang=en
Voila.
I tried making the new lackey the official release, but I had to revert back. I'll continue fixing bugs and make it the new official release as soon as I fix some issues.
FYI, the autoupdate for both the new and old lackey is now broken. This only affects Lackey itself. The plugin updating within lackey is still working fine.
Right-clicking cards in a zone and choosing 'send to bottom of' sends them to top instead.
On a related note, cards that are revealed from Top or Bottom of a zone (in that little window) can't be right clicked to send to top or bottom of.
Two more bugs:
In deck editor, load a deck with a sideboard, then select the sideboard tab
Then, load a deck without a sideboard. You should see the cards from the previous deck's sideboard
Start clicking these cards that shouldn't be in this sideboard, and lackey crashes soon after.
'discard X at random' puts cards into the graveyard, but doesn't remove them from the hand.
If the discarded cards are moved to a new zone, however, their duplicates in the hand dissapear.
I fixed all of those bugs, Carabas. Thanks.
Can you give us any idea how close the new ver will be released? Looking forward to playing when people are actually on. You were close a few days ago so I'm hoping it wont be to long and I know I'm not the only one.
i currently have the 10/16/10 verion of lacky as well as the 10/14/09 version and every time i try to sign in on either one it says that it doesnt work, nothing about a server being down so how can i connect to the lackey server?
Please test these. If enough people are testing these and there are no major bugs I will post this as the official version tomorrow. I will not make the new version official until it is tested, so please test these.
The links for the windows and mac version applications are:
http://lackeyccg.com/LackeyCCGWin.zip
http://lackeyccg.com/LackeyCCGMac.zip
Remember, to connect to the new server, connect to the server by IP: 66.65.20.193 and port: 25712. Remember, that is not the normal default server port the old lackey used. I will keep the test server online unless I post here. I will only take it down if there turns out to be a crippling networking bug.
I downloaded the new version. When I unzipped the file, I notice I still only have one folder (from the previous version) named "LackeyCCG" on my OSX mac. When I attempt to browse the images/avatars file from within the new lackey, there are no items in the directory, and no items in the images/backgrounds or images/zonebackgrounds either. I downloaded the latest Magic plugin and it works well, but I noticed the plugins folder containing the magic plugin is on my desktop, rather than in some lackeyccg folder like it is in the previous version.
I experienced the same problem as Grandpa, but mine also refuses to update the plugin. I've ran the update 3 times, and when closing the program and reopening it, it still won't let me in the deck editor or anything. When I reopen Lackey, I still see the same screen, with the same plugin loaded up everytime (lbs or something like that) I see no evidence of any of the plugin attempts working in the new Lackey, and my old Lackey (the beta, 10-14-09) won't even open.
I know Grandpa said he was on the Mac version. Are you also using the Mac version heynow, or the windows version?
Mac as well
It seems to be working just fine for me. I'm on Windows. I won't how the play works until anyone else is on the server.
Quote from: GrandpasEyebrows on October 22, 2010, 06:17:40 PM
I downloaded the new version. When I unzipped the file, I notice I still only have one folder (from the previous version) named "LackeyCCG" on my OSX mac. When I attempt to browse the images/avatars file from within the new lackey, there are no items in the directory, and no items in the images/backgrounds or images/zonebackgrounds either. I downloaded the latest Magic plugin and it works well, but I noticed the plugins folder containing the magic plugin is on my desktop, rather than in some lackeyccg folder like it is in the previous version.
You put the new .app in your old lackey folder, right?
Got the 10-23 version, pics are fixed but my sound doesnt work. all the .wav files are in the folder. (on a mac osx btw)
Quote from: heynow on October 24, 2010, 10:28:56 AM
Got the 10-23 version, pics are fixed but my sound doesnt work. all the .wav files are in the folder. (on a mac osx btw)
Did you enable sound? Your old sound preferences may have been reset.
Sound was not working for me, with 10-23 on a mac. While Lackey was closed, I opened secure/Preferences.txt and changed the line SOUNDOUTGOINGENABLED:1 to SOUNDOUTGOINGENABLED:0. Then I reopened Lackey and sound worked. It even worked if i changed that setting back. Maybe I did something else weird that fixed it, I don't know for sure.
Once sound started working, it still played chat sounds even if I turned chat sounds off.
Quote from: psly4mne on October 24, 2010, 12:49:57 PM
Sound was not working for me, with 10-23 on a mac. While Lackey was closed, I opened secure/Preferences.txt and changed the line SOUNDOUTGOINGENABLED:1 to SOUNDOUTGOINGENABLED:0. Then I reopened Lackey and sound worked. It even worked if i changed that setting back. Maybe I did something else weird that fixed it, I don't know for sure.
Once sound started working, it still played chat sounds even if I turned chat sounds off.
I tried this method, and nothing worked. I do believe it was something other than the changing of SOUNDOUTGOINGENABLED. If anyone else figures out a more concrete method let me know here or on the servers.
I just downloaded a fresh copy of the standard Lackey install and the 10-23 build for mac, dropped it in, and sound worked. I didn't change any settings or anything.
Quote from: psly4mne on October 24, 2010, 04:21:27 PM
I just downloaded a fresh copy of the standard Lackey install and the 10-23 build for mac, dropped it in, and sound worked. I didn't change any settings or anything.
trying this now
Quote from: heynow on October 24, 2010, 04:42:31 PM
Quote from: psly4mne on October 24, 2010, 04:21:27 PM
I just downloaded a fresh copy of the standard Lackey install and the 10-23 build for mac, dropped it in, and sound worked. I didn't change any settings or anything.
trying this now
did not work at all
Quote from: DemonicSei on October 24, 2010, 06:00:19 PM
Just had my 9th disconnections in the last 2 days...
Is there anything going on, like on the server or in a game, when you get DCed.
Bugs in the 10-23 build, observed on mac:
I cannot move cards between zones (except into play) by dragging them into the zone. When I start dragging a card, it gets highlighted and becomes semi-transparent, as normal. But when I drop it in another zone, it stays transparent and doesn't move. Nothing shows up in the game log. Dragging cards onto the tab with the name of a zone seems to work okay.
Spawned cards do not disappear when they are moved to another zone through the right-click menu. The log says they cease to exist (if they were moved from play), but they are still there, and they count towards the size of the zone. If I move a spawned card between two zones other than play by dragging it, it does cease to exist, but nothing shows up in the log.
If I move cards between zones through the right-click menu, the sizes of zones does not update until I do something else that causes it to refresh, like drawing a card.
I believe all of this was working before, and I can't reproduce it on another instance, but it is occurring consistently - relaunching Lackey doesn't help.
Quote from: psly4mne on October 25, 2010, 08:38:23 AM
Bugs in the 10-23 build, observed on mac:
I cannot move cards between zones (except into play) by dragging them into the zone. When I start dragging a card, it gets highlighted and becomes semi-transparent, as normal. But when I drop it in another zone, it stays transparent and doesn't move. Nothing shows up in the game log. Dragging cards onto the tab with the name of a zone seems to work okay.
I wasn't able to reproduce this first bug. How exactly are you moving them? Remember that there are so many ways to do everything, you need to be very specific. For example, you said "But when I drop it in another zone...". Did you drop it on the zone tabs (the player stat tabs, the below table tabs, or the right of table tabs)? Did you drop it onto the field where you see the cards? The bottom one or the right one?
If you can figure out a way to reliably reproduce the bug, and I can repeat it, I can surely fix it.
QuoteSpawned cards do not disappear when they are moved to another zone through the right-click menu. The log says they cease to exist (if they were moved from play), but they are still there, and they count towards the size of the zone. If I move a spawned card between two zones other than play by dragging it, it does cease to exist, but nothing shows up in the log.
Fixed.
QuoteIf I move cards between zones through the right-click menu, the sizes of zones does not update until I do something else that causes it to refresh, like drawing a card.
Fixed.
I just posted a new version today. I think it will fix those disconnects DemonicSei and Isabella reported. Let me know if it persists.
I also think I fixed the issue people where having with the mac version where they couldn't find sounds and images and such.
Where is the update? The DL page still says its the old ver.
Try the first page of this thread...
Grrr that was right. The LAST EDIT on was OCT 11th. I thought it would have said the 25th since it's "pointing" to something diff. Thanks.
It's not pointing to anything different though. Trevor just updates the zip file. ;)
Quote from: Trevor on October 25, 2010, 10:08:59 PM
Quote from: psly4mne on October 25, 2010, 08:38:23 AM
Bugs in the 10-23 build, observed on mac:
I cannot move cards between zones (except into play) by dragging them into the zone. When I start dragging a card, it gets highlighted and becomes semi-transparent, as normal. But when I drop it in another zone, it stays transparent and doesn't move. Nothing shows up in the game log. Dragging cards onto the tab with the name of a zone seems to work okay.
I wasn't able to reproduce this first bug. How exactly are you moving them? Remember that there are so many ways to do everything, you need to be very specific. For example, you said "But when I drop it in another zone...". Did you drop it on the zone tabs (the player stat tabs, the below table tabs, or the right of table tabs)? Did you drop it onto the field where you see the cards? The bottom one or the right one?
If you can figure out a way to reliably reproduce the bug, and I can repeat it, I can surely fix it.
I'm dropping the cards onto the field where you see the cards. Bottom or right, doesn't matter. I poked at it a little more and figured out that the problem occurs when AUTOCLEARCARD is 1.
Quote from: psly4mne on October 26, 2010, 03:42:23 AM
Quote from: Trevor on October 25, 2010, 10:08:59 PM
Quote from: psly4mne on October 25, 2010, 08:38:23 AM
Bugs in the 10-23 build, observed on mac:
I cannot move cards between zones (except into play) by dragging them into the zone. When I start dragging a card, it gets highlighted and becomes semi-transparent, as normal. But when I drop it in another zone, it stays transparent and doesn't move. Nothing shows up in the game log. Dragging cards onto the tab with the name of a zone seems to work okay.
I wasn't able to reproduce this first bug. How exactly are you moving them? Remember that there are so many ways to do everything, you need to be very specific. For example, you said "But when I drop it in another zone...". Did you drop it on the zone tabs (the player stat tabs, the below table tabs, or the right of table tabs)? Did you drop it onto the field where you see the cards? The bottom one or the right one?
If you can figure out a way to reliably reproduce the bug, and I can repeat it, I can surely fix it.
I'm dropping the cards onto the field where you see the cards. Bottom or right, doesn't matter. I poked at it a little more and figured out that the problem occurs when AUTOCLEARCARD is 1.
Fixed.
Quote from: Trevor on October 26, 2010, 06:30:08 AM
Fixed.
The beta link still points to the 10-25 build. Just so you know.
The 10-25 is the latest posted. That last fix isn't public yet.
To the mac users who have experienced some sound related bugs, ie, sound would not play, please download the link and try that version. I think your sound should play. Let me know either way.
It still says the 10-25-10 date, but it is a new build.
http://lackeyccg.com/LackeyCCGMac.zip
I just posted a new test version of LackeyCCG. If today's testing goes well, I will make this version official in a day.
Please report all bugs that still persist in this 10-28-10 version.
http://lackeyccg.com/LackeyCCGWin.zip
http://lackeyccg.com/LackeyCCGMac.zip
Found a bug. No matter what plugin I try I can not get hit the Auto Update button it is just dark gray.
Quote from: TheBuck on October 28, 2010, 06:43:31 AM
Found a bug. No matter what plugin I try I can not get hit the Auto Update button it is just dark gray.
Works fine for me. Did you click Medium or High where it says "Select plugin quality/size"?
Quote from: TheBuck on October 28, 2010, 06:43:31 AM
Found a bug. No matter what plugin I try I can not get hit the Auto Update button it is just dark gray.
Are you talking about the button that says "Update from URL"?
What operating system (and version) are you running?
Now it's working fine.
i found a bug displayed here (http://img51.imageshack.us/img51/2844/boterror.th.png) (http://img51.imageshack.us/i/boterror.png/)
notice the to different bot pics displayed and no this dose not affect the tilted bot pic. strange as it is.
Quote from: Gordon228 on October 28, 2010, 12:47:49 PM
i found a bug displayed here (http://img51.imageshack.us/img51/2844/boterror.th.png) (http://img51.imageshack.us/i/boterror.png/)
notice the to different bot pics displayed and no this dose not affect the tilted bot pic. strange as it is.
Fixed.
I upgraded the networking and I am told by the creator of the networking that it should no longer disconnect people. The rest of today I will play test games and such. If there are no significant bugs, this will be official by tonight.
good job on fixing it now the right pic shows but once you see it it never leaves and adding a screen would not help
Quote from: Gordon228 on October 28, 2010, 09:27:46 PM
good job on fixing it now the right pic shows but once you see it it never leaves and adding a screen would not help
Heh. Ok. I just fixed it fo' realz.
Quote from: DemonicSei on October 28, 2010, 10:45:32 PM
Quote from: Trevor on October 28, 2010, 02:07:19 PM
I upgraded the networking and I am told by the creator of the networking that it should no longer disconnect people. The rest of today I will play test games and such. If there are no significant bugs, this will be official by tonight.
I got disconnected at 3:23 PM, 5:33 PM, 5:56 PM, 8:13 PM, 9:53 PM. I guess the creator of the networking lied...
I find it a bit strange that you are one of the only people to experience the disconnect bug and the need-to-run-as-admin issue. I wonder if they are actually related. After you ran windows updater, did you restart your computer? You may need to for things to take effect.
2:58am EST can not connect. Just get Connection attempt failed.
It's working so I'm guessing you were just off line.
I just noticed Institute trying to connect to the server. Something he did made the server bug out like no one else I've seen.
Hi Trev,
It has crashed on me numerous times doing simple things like trying to make a game and trying to "whisper" to others. I cannot enter any chat in the main log window either. Occasionally, I get a debug message in the chat. I am on a Mac using OS X10.4.
Darryl
Using build 10-29-10. It now says my version of lackey is out of date. Is there a new one?
Program doesnt even open for me. windows 7 64 bit
Is it normal i cant connect to the server of this version? i changed the port to 25712 still aint working
Oh yeah. The server was offline. I forgot to put it back up. It is up now.
I'm fixing some stuff. Test server is down now.
I made a new post with the new verison.
http://www.lackeyccg.com/forum/index.php?topic=686.0